New Items
-
€10,000Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Stroke length: 400mm Learn More
-
€600Movable welding bench MP 75, PE welding bench, PE pipe clamp, Socket fusion welder, Used machine Overall dimensions: Length: 665 mm Width: 480 mm Height: 380 mm Pipe clamp size: 40–75 mm Weight: 15 kg The MP‑75 welding bench can be used with any fittings sized 40–75 mm, since each clamping jaw can be adjusted individually. Any suitable welding machine can be used for the welding process (not included with the bench). The total weight of the bench is only 15.5 kg. If the two outer jaws are not needed during welding, they can be removed, reducing the total weight by about 4 kg. The construction ensures the ideal fixation of pipes and fittings to be welded. Learn More
-
€600Movable welding bench MP 75, PE welding bench, PE pipe clamp, Socket fusion welder, Used machine Overall dimensions: Length: 665 mm Width: 480 mm Height: 380 mm Pipe clamp size: 40–75 mm Weight: 15 kg The MP‑75 welding bench can be used with any fittings sized 40–75 mm, since each clamping jaw can be adjusted individually. Any suitable welding machine can be used for the welding process (not included with the bench). The total weight of the bench is only 15.5 kg. If the two outer jaws are not needed during welding, they can be removed, reducing the total weight by about 4 kg. The construction ensures the ideal fixation of pipes and fittings to be welded. Learn More
-
€17,000Plasma cutting machine, oxy-fuel cutting machine, Stako Rotoplasma, used machine Manufacturer: Stako Model: Magnum Bevel Serial Number: 900.780 Year: 2008 Plasma cutting controller: Hypertherm HPR260 Oxy-fuel torches: 2 Plasma torch: 1 Servo drives: ASR-310/5 PLC: Siemens S7-300, CPU 314C-2 PtP Cutting range: Width: 3500 mm Length: 17,500 mm Plate thickness: 4–35 mm Included with the machine: Hypertherm HPR260 plasma cutting controller 2 oxy-fuel torches and 1 plasma torch Siemens PLC, Siemens OP7 panel, Burny 10LCD Plus operator panel Documentation Rails and fastening components Not included with the machine: Cutting table Fume extraction system Learn More
-
€1,000Grinder, Plastic grinder, Shredder Grinder, Plastic Shredder, used machine Overall dimensions: Length: 1250 mm Width: 550 mm Height: 1660 mm Weight: 330 kg Electrical data: 400 V; 1,8 kW; Manufacturer: Moditec Model: Gplus 3 ACP Year of manufacture: 2007 Learn More
-
€1,000Grinder, Plastic grinder, Shredder Grinder, Plastic Shredder, used machine Overall dimensions: Length: 1270 mm Width: 550 mm Height: 1530 mm Weight: 330 kg Electrical data: 400 V; 1,8 kW; Manufacturer: Moditec Model: Gplus 3 ACP Year of manufacture: 2006 Learn More
-
€3,500Lathe TOS SN 50 B, Used Machine Overall dimensions: Length: 3620 mm Width: 1000 mm Height: 1510 mm TOS SN 50 B (Gap-Bed) – Main Features Distance between centers: 2000 mm Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Spindle bore: approx. 52 mm (2″) Maximum spindle speed: 2000 RPM Motor power: approx. 5.5–7.5 kW (7.5 HP) Weight: 1650 kg Typical use: industrial precision turning, especially for long workpieces Learn More
-
€1,750Granulate Feeder, Gravimetric Feeder, Motan GC 100-P, Used Machine Manufacturer: Motan Model: GC100-P-0 Dimensions: 730 x 620 x 2050 mm Weight: 112 kg Throughput Capacity: 150 kg/h Electrical Specifications: 230 V; 50 Hz; 2 A For sale: Motan GC 100-P granulate conveying system in excellent condition! This high-quality machine ensures efficient and dust-free conveying of plastic granules to injection molding machines. Its compact design offers a space-saving solution, while automated operation guarantees continuous production. An ideal choice for any plastics processing facility seeking a reliable and energy-efficient conveying system. Learn More
-
€750Compressor 2.2 kW, Used Machine Overall dimensions: Length: 1000 mm Width: 480 mm Height: 880 mm Weight: 71 kg Manufacturer: Balma Tank capacity: 100 L Power: 2.2 kW (3 HP) Pressure: 10 bar Air delivery: 393 / 260 liters per minute Voltage: 400 V (3-phase) Speed: 1050 RPM Noise level: 93 dB Learn More
-
€290Pedestal drill, column drill, industrial drilling machine, used machine Overall dimensions: Length: 800 mm Width: 320 mm Height: 770 mm Weight: 80 kg Electrical data: 380 V, 50 Hz Manufacturer: Gép Szöv. Model: PAF 15 Year of manufacture: 1980 Table size: 210 × 215 mm Learn More
-
€875Generator, Power Generator, Used Machine Overall dimensions: Length: 830 mm Width: 510 mm Height: 560 mm Manufacturer: Europower Outputs: 2 × single-phase output 230 V, 30.4 A, 7 kVA Weight: 40 kg Learn More
-
€1,250Testo 480 multifunkciós klímatechnikai mérőműszer , hőmérséklet, páratartalom, légsebesség mérésre, használt gép Gyártó : Testo Típus : 480 A Testo 480 beépített, nagy pontosságú differenciálnyomás-érzékelővel rendelkezik, amely alkalmas pl. Pitot-csöves mérésekre, szűrő- és tisztatér-ellenőrzésekre. Széles körű csatlakoztatható érzékelőválasztéka lehetővé teszi az alábbi paraméterek mérését: Légsebesség, légmennyiség (pl. elszívófülke mérésekhez) Hőmérséklet Relatív páratartalom Differenciál- és abszolút nyomás CO₂ koncentráció Fényerősség PMV/PPD (komfortindex) Hősugárzás Légörvény intenzitás (turbulencia) WBGT index (hőstressz) A műszer testreszabható különféle opcionális érzékelőkkel és kiegészítőkkel (pl. vezeték nélküli nyomtató helyszíni jegyzőkönyvekhez). Technikai leírás Hőmérsékletmérés Pt100 érzékelő Mérési tartomány: –100…+400 °C Felbontás: 0,01 °C TC Type K (NiCr-Ni) érzékelő Mérési tartomány: –200…+1370 °C Pontosság: ±(0,3 °C + 0,1 % mért érték) Felbontás: 0,1 °C Relatív páratartalom (kapacitív érzékelő) Mérési tartomány: 0…100 %RH Felbontás: 0,1 %RH Légsebesség – lapátkerekes anemométer Ø 16 mm: 0,6…50 m/s | Felbontás: 0,1 m/s Ø 100 mm: 0,1…15 m/s | Felbontás: 0,01 m/s Légsebesség – hődrótos érzékelő Mérési tartomány: 0…20 m/s Felbontás: 0,01 m/s CO₂ koncentráció (környezeti levegő) Mérési tartomány: 0…10 000 ppm Felbontás: 1 ppm Komfortérzet mérése Mérési tartomány: 0…5 m/s Felbontás: 0,01 m/s Differenciálnyomás – beépített piezorezisztív érzékelő Mérési tartomány: –100…+100 hPa Pontosság: 0…25 hPa: ±(0,3 Pa + 1 % mért érték) 25,001…100 hPa: ±(0,1 hPa + 1,5 % mért érték) Felbontás: 0,001 hPa Fényerősség Mérési tartomány: 0…100 000 Lux Felbontás: 1 Lux Abszolút nyomás (belső és külső szonda) Mérési tartomány: 700…1100 hPa Pontosság: ±3 hPa Felbontás: 0,1 hPa Általános műszaki adatok Súly: 435 g Működési hőmérséklet: 0…+40 °C Tárolási hőmérséklet: –20…+60 °C Védettség: IP30 Csatlakoztatható szondák: 2 x TC Type K, 1 x differenciálnyomás (belső), 3 x digitális szonda Megfelelőség: 2004/108/EK irányelv Akkumulátor-üzemidő: kb. 17 óra (50% kijelző fényerővel, szonda nélkül) Kijelző: színes grafikus Tápellátás: beépített akkumulátor, hálózati töltő a hosszú távú mérésekhez Adatátvitel: USB-kábel vagy SD-kártya Memóriakapacitás: 60 000 000 mérési érték Learn More
-
€875Generator, Power Generator, Used Machine Dimensions: Length: 845 mm Width: 525 mm Height: 500 mm Manufacturer: Honda Model: TR-7E AVR 2 x single-phase output Weight: 40 kg Learn More
-
€3,250Beveling Machine, Pipe End Prep Machine, Ridgid B-500, Used Machine Overall Dimensions: Length: 410 mm Width: 240 mm Height: 365 mm Technical Description: Capacity: 3½″ (100 mm) pipe and larger Torque wrench and bolts: Minimum: 0.188″ (4.8 mm) Maximum: 0.5″ (12.7 mm) Bevel angles: Standard: 37.5° Optional: 30° and 45° Cutting head: Suitable for most steel and stainless steel pipes* Land width adjustment: 0 to ³⁄₁₆″ (4.8 mm), in approximately ¹⁄₃₂″ (0.8 mm) increments Motor type: 230 V / 115 V, 50 / 60 Hz, universal motor Speed: 950 RPM Weight: 24 kg Standard Kit Includes: Beveling unit Drive arm 37.5° cutting head 6 pcs of four-sided inserts Torque wrench Bolts Learn More
-
€3,000PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg Learn More
-
€6,000Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow. Learn More
-
€1,000Liquid Cooler, Used Machine length: 800 mm width: 300 mm height: 350 mm manufacturer: Ganz manufactured: 1982 electrical data: 220 V; 0,15A Learn More
-
€1,200Air dryer,Donaldson 4,3 kW, Used Machine Dimensions: Length: 900 mm Width: 1250 mm Height: 1720 mm Manufacturer: Donaldson Model: DV 2800 AP Refrigerant: R134a | 6.5 kg Electrical data: 380 V; 4.3 kW; 12.58 A Learn More
-
€625Pump, Centrifugal Pump, 3 kW Pump, Wilo Pump, Used Machine Overall dimensions: Length: 520 mm Width: 400 mm Height: 490 mm Weight: [kg not specified] Electrical data: 400 V; 3 kW; 1450 RPM Q max: 60 m³/h Head: 10.5 m Manufacturer: Wilo Type: B 80/200 - 3/4 Learn More
-
€1,650Liquid Cooler,Chiller, Used Machine length: 2900 mm width: 1000 mm height: 1280 mm electrical data: 400V; 0,25kW; 3,3 A Learn More
-
€1,375Centrifugal fan, 25,000 m³/h, used machine Airflow: 25,000 m³/h Inlet diameter: 320 mm Outlet size: 480 × 270 mm Learn More
-
€300,000Grundfos pump, circulation pump, Grundfos UPS 65-60 2F, used machine Manufacturer: Grundfos Model: UPS 65-60 2F Power supply: 230 V Flow rate: 667 l/min Head (max. lifting height): 6 m Power consumption: 490 W Current draw: 2.4 A Connection (discharge side): DN 65 Flange Connection (suction side): DN 65 Flange Installation length: 340 mm Learn More
-
€1,200Extractor, workplace fume extractor Plymovent MSF 2000– Used equipment Overall dimensions: Length: 870 mm Width: 1370 mm Height: 3300 mm Weight: 169 kg Extraction arm reach: 2800 mm Electrical data: 400V; 1.1 kW; 2.7 A Maximum airflow: 1750 m³/h Year of manufacture: 1993 Manufacturer: Plymovent Model: MSF 2000 Learn More
-
€1,350Scissor lift, scissor lift table, hydraulic lift table – Used machine Overall dimensions: Length: 1300 mm Width: 800 mm Height: 1100 mm Table size: 1300 x 800 mm Maximum lifting capacity: 1 ton Electrical data: 380V; 50Hz; 2.2 kW; 2850 RPM Learn More
-
€1,475Labyrinth filter, activated carbon filter – Used equipment Overall dimensions: Length: 1090 mm Width: 1200 mm Height: 2750 mm Learn More
-
€3,250Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Width: 700 mm Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Type: SAH 235 Pressure range: +650 to -470 mbar Max airflow: 240 m³/h Learn More
-
€6,250Steel hall structure, industrial hall, steel construction – Used equipment Overall dimensions: Length: 21 m Width: 15 m Height: 5.9 m Currently in dismantled condition! Learn More
-
€4,400CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM Learn More
-
€875Rotary feeder, used machine Overall dimensions: Length: 860 mm Width: 1280 mm Height: 1090 mm Electrical data: 400V Cell size: 200 x 350 mm Number of cells: 6 Hopper size: 340 x 210 mm Learn More
-
€300Geared motor, used machine Overall dimensions: Length: 800 mm Width: 300 mm Height: 380 mm Electrical data: 400V; 1.7 kW; 1500 rpm Manufacturer: Hajtómű és Felvonógyár Type: 32.40.100 Learn More
-
€450Rotary valve feeder, used machine Overall dimensions: Length: 640 mm Width: 510 mm Height: not specified Cell size: 355 x 175 mm Hopper size: 340 x 200 mm Number of cells: 6 Learn More
-
€1,375Fan, centrifugal fan 11 kW, used equipment Overall dimensions: Length: 820 mm Width: 1270 mm Height: 1100 mm Electrical data: 400V; 11 kW; 21.5 A Blade size: 250 x 110 mm Blade diameter: 800 mm Learn More
-
€750Electrical distribution cabinet for fire suppression system, control cabinet, used equipment Overall dimensions: Length: 1030 mm Width: 280 mm Height: 1900 mm Electrical data: 400V, 50Hz These types of electrical cabinets are primarily used for automatic fire extinguishing systems operating with aerosol or gas. The control system is divided into 2 halls and currently operates 3 extinguishing heads in each. Learn More
-
€1,500.Sepro Robot, industrial robot, Used Machine Overall dimensions: Length: 4020 mm Width: 2000 mm Height: 1570 mm Manufacturer: Sepro Generation IV Axis travel: X-axis: 3600 mm Y-axis: 1300 mm Z-axis: 2800 mm Without control unit. Operation has not been tested. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€1,000Extractor, workplace extractor, Plymovent, Used machine Overall dimensions: length: 640 mm width: 1110 mm height: 2740 mm Weight: 169 kg Extractor arm reach: 3000 mm Electrical data: 400V, 1.1 kW Max airflow: 1400 m³/h Year of manufacture: 2008 Manufacturer: Plymovent Learn More
-
€4,000The PEIRS Sputtering 120 kW power supply is a high-power voltage conversion device used for thin film deposition by sputtering. Sputtering technology allows for the deposition of ultra-thin layers of various materials, such as metals, insulators, and semiconductors. The PEIRS 120 kW power supply features the following: Output power: 120 kW Input voltage: 480 VAC, 3-phase Output voltage: 0-1200 VDC Output current: 0-1000 ADC Power factor: 0.97 Overall dimensions: 1220 mm x 850 mm x 2300mm (height). Weight: 1100 kg. Protection features: short circuit, overload, overvoltage Modular design, allowing for easy maintenance and flexible expansion. This power supply operates reliably and efficiently with high-power ion sources used in the sputtering process and large-area target substrates. Learn More
-
€13,000Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Output: 55 kW Weight: 1950 kg Learn More
-
€3,250PVD generator HÜTTINGER TIG 30 DC specification • Output voltage: 0-825V • Maximum output power: 30 kW • Input voltage: 3 x 400 VAC ±10%, 50/60 Hz • Output current range: 0-1000 mA (DC) • Elongation: < 0.5% (peak to peak) • Stability: < 0.1% (for 8 hours) • Control interface: RS-232, analog 0-10 V • Safety features: overvoltage protection, overcurrent protection, temperature monitoring • Operating temperature: 0-40°C • Dimensions: 19" rack support, 10U height (440 x 580 x 450 mm) Please note that these specifications may vary depending on the type and configuration of the HÜTTINGER TIG 30 DC power supply. Schneider DLAS 41F-0215T17001 power supply Electrical data: 50/60 Hz 33kVA Pri.: 400/480 V 49/41 A Sec.: 255 V 25 A Sec.: 255 V 25 A Sec.: 255 V 25 A Size: 640 mm x 640 mm x 2200 mm (height) Weight: 516 kg Learn More
-
€2,240Diameter: 3590 mm Total height: 860 mm Thickness: 93 mm Leg diameter: 450 mm Useful surface width: 1210 mm Center hole diameter: 1170 mm Weight: 3580 kg Learn More
-
€765Strapped in rolls Tape size: 100 x 1.0 mm Meterial quality: S235 EN10025 Overall dimensions: D 1500 mm; d 250 mm Weight: 1220 kg Stock: 2 Tapes (1220 kg/tape) Please, note that we only sell whole rolls. Learn More
-
€380Overall size: - width: 800 mm - length: 700 mm - height (base position): 840 mm Lifting: 840 mm Learn More
-
Contact us for price!Gyártó: OLIMEX Tip: Solo R Fesz: 230V 50 Hz Készlet : 1 db ÁR / db !! értendő Learn More
-
€950Overall size: Lenght: 1100 mm Width: 900 mm Height: 2300 mm The filter is missing from the machine. Learn More
-
€375Manufacturer: Strigon Type: MP200M Overall dimensions: 1200 x 900 x 1400 Weight: 800 kg Copy Scale: - min. 1:10 - max. 1:1.5 Work table: - table movement in longitudinal direction, upper position 160 mm - table movement in intermediate position 100 mm - table movement in transverse direction 300 mm - max. distance between the tip of the milling spindle and the table is 315 mm Learn More
-
€625Barrel turner, used machine Manufacturer: nord type: sk 0182NB/VF IEC80/26 DEX 80K/4K/2G electrical data: 380V, 50Hz, 0,55KW, 1.38A, 1410 rpm enclosure dimensions: 1250 x 1130 x 290 mm weight: 120 kg Learn More
-
€170T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 550 mm Width: 555 mm Height: 545 mm Weight: 267 kg T-slot size: 50 x 20 mm Table size: Upper part: 550 x 555 mm Side part: 550 x 400 mm Tool clampable at 90˚ Learn More
-
€1,000Paper baler, hidraulic waste baler
Manufacturer
Type: PS 8100
Height: 2.200 mm
Width: 1.200 mm
Length: 1.625 mm
Loading height 1.900 mm
Weight: 800 kg
Nominal current in 400 V 4,8 A
Nominal transformator current in 230 V 0,38 A
Motor power: 2,2 kW
Fuse: 10 A, slow
Rotation: 13 ./min
Protection: IP 54
Fire class: D, E
Hidraulic oil: HLP 32
Bale weight (depend from the material): 150-400 kg
Bale volume: 1 m3
Learn More -
€950delivery capacity: 60 t / h weighing bridge: 890-1350 mm ,4 load cells, Certifiable Learn More
-
€530T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 1000 mm Width: 800 mm Height: 630 mm Weight: 854 kg T-slot size: 50 x 20 mm Table size: Upper part: 1000 x 800 mm Side part: 930 x 400 mm Worktable tiltable at 90˚ Learn More
-
€1,625Manufacturer: Günther Wagner Tank diameter: 290x220 mm / 3 pcs Learn More
-
€800Tank, Fuel Storage, Metal Tank, Water Tank, 1300 L Tank, Hydrophore, Used Machine Manufacturer: Vuorenteko Oy Overall dimensions: 1430 x 1160 x 1700 mm Year: 1999 Finnish standard type: SFS 2733 Volume: 1300 L Weight: 241 kg With manual pump In the condition shown in the picture and with the connection points visible. Learn More
-
€1,175Work table with "swallowtail" fixed cuttings Overall size:1100x1400x800 mm Weight: 1880 kg Learn More
-
€1,625Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Manufacturer: Mahle Type: MSK D37 Year: 1995 Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h Learn More
-
€1,250Gyártmány: JUNGHEINRICH Tip: ECE 220 Gyártási év: 2005 emelési mag: 150mm teherbírás: 2000 kg Üzemóra: 6711h Villahossz: 2500mm Learn More
-
€1,250Gyártmány: JUNGHEINRICH Tip: ECE 220 Gyártási év: 2005 emelési mag: 150mm teherbírás: 2000 kg Üzemóra: 17495h Villahossz: 2400mm Learn More
-
€1,500Manufacturer: BALKANCAR Type: 1 t Lifting height: 8 m Single speed, suspended Span: 8220 mm Car body width: 1900 mm Hand-operated lenghtwise movement. Learn More
-
€1,500Manufacturer: Trane Type: CLCE 1810 Year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Max. drive power: 37 kW Max. rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW Learn More
-
€2,200T-Slot Table, T-Slot Worktable, T-Slot Fixture Table 3000 x 1750 mm, Used Machine Overall Dimensions: 3000 x 1750 x 350 mm Slot Size: 65x27 mm Weight: 3500 kg Learn More
-
€1,125Design: Machine base and plinth integrated in a steel housing, composit concrete interior, Steel sleeves on the floor for fixing Table: welded steel plate structure Manufacturer: Framag hydropol Model: 7447 Overall dimensions: 3700x3200x3600mm Weight: 22000kg Learn More
-
€1,125Waste compactor with rotating compaction unit. It can be continously filled. Manufacturer: Bergmann Type: PS 8100-L Manufacturing year: 1987 Overall dimensions: 1500 x 1600 x 2200 mm Weight: 800 kg Useful size: -Grinding drum diameter: 1040 mm -Grinding drum height: 850 mm Grinder rev: 8 1/min Electrical data: Voltage: 220 / 380 V Electrical power: 1,1 kW Learn More
-
€2,000Manufacturer: W. Paul Müller Maschinenfabrik Type: 45 RV HK Voltage: 380 V Press force: 45 t Learn More
-
€7,250Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Airflow rate: 28,008 m³/h Electrical data: 400 V; 50 Hz; 67/38 A Learn More
-
€2,250Ultrasonic washer, JOKE TI-H 150, Used machine Manufacturer: JOKE, JOISTEN & KETTENBAUM Type: TI-H 150 Overall dimensions: 840 x 830 x 710 mm Tank size: 600 x 530 x 500 mm Weight: 150 kg Electrical data: 7.5 kW Heating power: 80°C Learn More
-
€2,250Manufacturer: BITZER -Type: 4PES-2Y-40P -Operating Pressure: 19 bar -Capacity: 48,5 m3/h -Overall dimensions: 600 x 300 x 400 mm -Voltage: 380V Learn More
-
€3,030Work table with T-fixing cuttins Overall size:1500x1200x800 mm Weight: 2820 kg Learn More
-
€875Fuel: natural gas Manufacturer: REMKO Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar The control cabinet is in incomplete condition! Learn More
-
€1,500Fuel: natural gas Manufacturer: REMKO Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar Learn More
-
€2,375It has a lifting and lateral moving function and four side clamping jaws, with a rotary table. Manufacturer : AGROMAT Kft - Machine type: BEF-15 - Lifting capacity: 1500 kg - Overall dimensions: 4000 x 1800 x 3700 mm - clamping dimensions: 1200 x 800 x 700 mm - range of movement of clamping jaws: 150 mm - lifting height: 700 mm Learn More
-
€1,155Lifting Beam, Spreader Bar, Used machine Overall dimensions: 5050 x 490 x 580 mm Weight: 1850 kg Load capacity: 48 t Learn More
-
€2,375Manufacturer: KROMAS Model: RE300 Year: 2002 Overall dimensions: 1950 x 900 x 1700 mm Trough dimesion: 1950 x 400 x 760 mm Electric power: 380 V; 16 A; 1,5 kW Total weight: 436 kg Learn More
-
€1,155250 Ft/kg. áron! Emelőhimba, emelőgerenda, Használt gép Befoglaló méretek: 5050 x 490 x 580 mm Súly: 1850 kg Teherbírás: 48 t Learn More
-
€2,750Coffee Filling and Packaging Machine Manufacturer: G. Calini Model: Vacuum 75 Overall dimensions: 4500 x 1950 x 2350 mm its not working Specifications: PLC: Omron CPM2A Frequency Converters: Omron VS Mini J7, Omron 3G3JV Inverter Operator Panel: ESA VT150WOOOOO Vibratory Feeder Trays: 400 x 170 x 75 mm and 210 x 155 x 160 mm 4-Segment Rotary Table: Ø 610 mm Compression Stroke Length: 235 mm Conveyor Belt: 1030 x 100 mm Sealing Press: 370 mm Discharge Conveyor: 940 x 100 mm Learn More
-
€2,375Rotary Lobe Blower, Roots Blower, Air Conveyor, Positive Displacement Blower, Compressor, J&H RV22.4 H2, Used Machine Manufacturer: J&H Type: RV22.4 H2 G Dimensions: 580 x 400 x 400 mm p1: 1000 mbar P1: 1.2 kg/m3 Volume Flow Rate: 10.34 m3/s Power: 23.4 kW Learn More
-
€1,000Manufacturer: Nahama Seisakusho Ltd Model: 140.HBAD Year: 1993 Weight: 30 kg Max. diameter of rotating part: 600 mm Balancing velocity: 900 1/min Power: 1,5 kW Learn More
-
€2,750Vibrating Feeder, Straight Stainless Steel Trough Feeder, Used Equipment Manufacturer: BTW BINDER Overall Dimensions: 1850 x 1300 x 800 mm Receiving Hopper Size: 890 x 390 mm Voltage: 220V Learn More
-
€3,000Sump pumps, submersible pumps, sump pumps, slurry pumps, submersible pump Manufacturer : Flygt Type : 2101 Overall dimensions : 650 x 490 x 790 mm Electrical data : 400 V; 80 A; 32 KW; 2000 rpm Lifting height : 20 m Weight : 100 kg Learn More
-
€6,000Design: at the bottom part prismatic passages, can be paired with another table Size: 5000 x 1600 x 370 mm 6 Tons Learn More
-
€8,000PLC contorolled parts washer equipment with air handling unit. With solvent regeneration funcion. It can use various types of solvents. Adjustable cycle time. Multiple washing technologies (fixed, rotary basket) Work space volume: 290 ltrs Max piece weight: 150 kg Electrical power: 400 V, 50 Hz For more information call us or send a message. Learn More
-
€8,000The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t Learn More
-
€8,000Sheet Metal Shear, Power Shear, Hydraulic Shear, Strojarne Piesok CNTA 3130, Used Equipment Cutting Length: 3150 mm Maximum Sheet Thickness: 16 mm Dimensions (L x H x W): 4.15 x 2.65 x 2.65 m (measured as a whole, without disassembly) Weight: 16,300 kg Manufacturer: Strojarne Piesok Model: CNTA 3130/16A Electrical Data: 400 V; 50 Hz; 33 kVA Unreliable operation! Learn More
-
€15,000Shot Blasting Machine, PARTICLE BLASTING MACHINE, Shot Blaster Units, , Schlick Particle Blasting, Roto-jet, Used Machine Manufacturer: USF SCHLICK, Heinrich Schlick Model: Roto-Jet, 24/23457 Year: 2001 Installation dimensions: 4560 x 3920 x 5080 mm Electrical Cabinet, PLC: - Siemens S7 1200 - Servomotor Controller 2 - Siemens Simatic HMI Display - 400 V ; 20 A Particle Blasting Chamber: Equipped with a servomotor, which synchronously drives the rotating table and the screw conveyor. Another servomotor provides the vertical movement of the particle sprayers. The chamber is lined and has doors that can be opened from multiple sides, with one side having a lifting opening. Table size: 900 mm in diameter. Maximum object size that can be placed: 1000 mm x 1000 mm in diameter Extraction System: Ensures the extraction of dust resulting from spraying, which it can perform in its own airspace. Equipped with bag filters on the exhaust side and cartridge filters on the extraction and dust separation side. Cup-type Distributor and Particle Sprayer Tank: The cup-type distributor transports the shot to a collector after the screw dispenser, which has a 3-stage filter for cleaning the particles (vibrating filter). The tank has outlets where the dosage of particle spraying can be regulated. - It is possible to connect to 10 adjustable particle spraying points. - Currently, 5 particle spraying points are connected. Learn More
-
€4,000Cylindrical Grinder, Surface Grinder, Schaudt MAR/750, Used Machine Overall Dimensions: Length: 2600 mm Width: 1740 mm Height: 1700 mm Weight: 4500 kg Electrical Data: 400 V; 7.5 kW; 16 A Grinding Specifications: Grinding Length: 750 mm Grinding Wheel Diameter: 500 mm Grinding Wheel Width: 90 mm Morse Taper: No. 4 Work Table Rotatable: ±10° Factory manual included. Learn More
-
€1,250Wittmann Robot, Industrial Robot, Linear Robot, Wittmann W633, Used Machine Manufacturer: Wittmann Model: W633 Dimensions: 2910 x 1370 x 1660 mm Year: 2000 Weight: 400 kg Without control unit, in the condition shown in the pictures. Learn More
-
€2,150Wittmann Robot, Industrial Robot, Linear Robot, Wittmann W621-2090, Used machine Manufacturer: Wittmann Type: W621-2090 Overall dimensions: 2910 x 1280 x 1700 mm Weight: 290 kg Year: 2006 X-axis: 550 mm Y-axis: 800 mm Z-axis: 2000 mm Sold as seen in the pictures, not tested. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€350Battery Charger; Jungheinrich 24V, 50A, Used Equipment Dimensions: Length: 500 mm Width: 500 mm Height: 730 mm Electrical Specifications: Input: 230V, 9A Output: 24V, 50A Manufacturer: Jungheinrich Model: E230 G24/50 B-SLT200 For sale is a reliable, industrial-grade Jungheinrich battery charger, model E230 G 24/50 B-SLT 200. It is specifically designed for charging 24V lead-acid batteries with a capacity of 195–250 Ah. Ideal for forklift trucks and other industrial vehicles. Operates from a standard 230V power supply, protection class IP22. Learn More
-
€1,000Adept Robot System, Industrial Robot, Used Machine Dimensions: Length: 1250 mm Width: 520 mm Height: 1860 mm Manufacturer: Adept Robot System Model: Cobra 800 Type: SCARA (4-axis) Maximum reach: 800 mm Rated payload: 2 kg Maximum payload: 5.5 kg Repeatability (XY): ±0.017 mm Repeatability (Z): ±0.003 mm Repeatability (Theta): ±0.019° Protection class: IP65 Year of manufacture: 2003 (according to label) Special features: Outstanding precision and speed Integrated servo amplifier and controller (space-saving design) Conveyor tracking and vision system integration capability Easy calibration with absolute encoder Optional IP65 protection (dust and waterproof design) Summary: The Adept Cobra 800 is a high-performance, compact SCARA robot designed for fast, precise, and flexible industrial automation tasks. With a maximum reach of 800 mm, payload capacity of 2–5.5 kg, and excellent repeatability, it is an ideal solution for assembly and material handling operations. Without controller! Learn More
-
€300Pedestal grinder, bench grinder, used machine Electrical specifications: 400V Grinding wheel size: 350 x 40 mm Overall dimensions: Length: 710 mm Width: 600 mm Height: 1140 mm Learn More
-
€375Pedestal grinder, bench grinder, used machine Manufacturer: Mager & Wedemeyer Electrical specifications: 400V, 3kW, 6.3A Grinding wheel size: 400 x 40 mm Overall dimensions: Length: 1140 mm Width: 740 mm Height: 1150 mm Learn More
-
€12,500Emulsion Treatment System, Knoll 320 s-1/200, FKA/950, Used Machine Manufacturer: Knoll Type: FKA/950 Chip Conveyor: 320 s-1/200 Year: 2015 Key Features: High-quality German industrial technology Robust and reliable design Efficient filtration for cooling and lubricating fluids Ideal solution for central or local filtration systems Application Areas: Mechanical engineering Metalworking Fluid management for CNC machines and production lines Cleaning of cooling and lubricating emulsions Learn More
-
€3,700Chip Conveyor, Knoll 320 s-1/200, Used Machine Manufacturer: Knoll Type: 320 s-1/200 Year: 2015 Overall dimensions: 6200 x 1310 x 1610 mm Belt dimensions: 500 x 1400 x 4700 mm Lamella spacing: 315 mm Learn More
-
€7,500Belt filter, KNOLL FKA/950 industrial filtration unit, Used machine Manufacturer: KNOLL Maschinenbau GmbH Type: FKA/950 Year of Manufacture: 2015 Overall dimensions: Length: 1900 mm Width: 1400 mm Height: 1800 mm Key Features: High-quality German industrial technology Robust and reliable design Efficient filtration of coolant lubricants and other technical fluids Ideal solution for both central and local filtration systems Application Areas: Mechanical engineering Metalworking Fluid management for CNC machines and production lines Cleaning of coolant and lubrication emulsions Learn More
-
€14,000KUKA Robot, 6-axis robot, KUKA KR 60-3, KUKA KR C4, Used machine Manufacturer: KUKA Model: KR 60-3 Control type: KR C4 Total number of movements: 45,000 KRC4 SmartPad control panel Year: 2015 Overall dimensions: 2480 x 1980 x 2450 mm (with cell) Payload capacity: 60 kg Arm reach: 2033 mm Repeatability: ±0.06 mm Electrical power: 400 V; 32 A Learn More
-
€220Overall dimensions: 250 x 280 mm Electrical data Power: 0.45kW IP55 380 - 420 V, 1.1 A 220 - 240 V, 1.9 A Learn More
-
€760Type: SD-6 Overall dimensions: 500 x 710 mm Electrical Data: - 220/380 V - 2,6 kW - 10/5,8 A RPM: 2860 Pmin: 300 mbar; 4,6 m³/min Learn More
-
€870Overall dimensions: 700 x 600 mm Electrical data IP54 4kW - 230V, 50Hz, 13.6A - 400V, 50Hz, 7.8A 4.63kW - 460V, 60Hz, 7.7A Learn More